PRODUCT DESCRIPTION

Stone Mason Texture Guard is an extremely weather resistant breathing-type 100% acrylic. It is a ready-to-use textured coating designed to protect and decorate a wide array of interior and exterior surfaces. Heavy bodied, Texture Guard is specifically formulated to fill pores and surface defects in masonry, or concrete and to provide an aesthetically pleasing surface texture.

ADVANTAGES

Economical:

• High hiding capability, and longevity
• Easy to apply by roller or spray.

Durable:

• Resists abrasion
• Excellent colour retention
• Breathable coating allows moisture release while stopping water penetration
• Does not become brittle
• Resists Ultraviolet deterioration
• Passes 5000 hour Weatherometer testing

Reliable at low temperature: Can form a continuous film at lower temperatures than many competitive products.

Blisterproof: A heavy bodied coating that fills pores and cracks to stop water penetration but allows breathing to release moisture, without disruption of film integrity.

COVERAGE

Depending on the porosity of the surface, each litre will cover 1.25 - 2.5 m² (50 - 100 sq.ft. per gallon)when applied at a thickness of 9 to 18 mils Dry Film Thickness (15 to 30 mils Wet Film Thickness).

MAINTENANCE

Work should be inspected periodically. If any problems are found, they should be corrected as they develop. This will result in an economically priced, long lasting installation.

WARRANTY
The consumer shall satisfy themselves of the suitability of this product for the intended purpose. Weather, applicator's skill and surface conditions are beyond manufacturer's control. We, therefore, limit our liability to replacement of defective material only, within one year of proof of purchase.