PRODUCT DESCRIPTION

Last-O-Guard is an extremely flexible, long-lasting, high-build elastomeric coating which resists salt spray, chemical attack and normal weathering. Being an acrylic emulsion Last-O-Guard has excellent resistance to Ultraviolet degradation and therefore excellent color retention. Last-O-Guard is an internally plasticized resin which means the flexible nature of the coating will not distill out of the coating and the coating will bridge hairline cracks and continue to expand and contract as required by thermal expansion and contraction for many years of active service life.

ADVANTAGES

Durable: Flexible nature allows Last-O-Guard to flex and span hairline cracks thereby eliminating water penetration; retains flexibility to -34°C (-30°F); permits transmission of water vapour without loss of adhesion.

Labour saving: Easy application by roller or spray; cleans up with soap and water; no primer necessary; excellent resistance to Ultraviolet degradation; permanently seals cracks; remains flexible.

Color retention: Acrylic holds colours longer

COVERAGE

Coverage will vary with the texture and porosity of the substrate, however the following should be a reliable rule of thumb on smooth concrete surfaces:

MAINTENANCE

Work should be inspected periodically. If any problems are found, they should be corrected as they develop. This will result in an economically priced, long laster installation.

WARRANTY
The consumer shall satisfy themselves of the suitability of this product for the intended purpose. Weather, applicator's skill and surface conditions are beyond manufacturer's control. We, therefore, limit our liability to replacement of defective material only, within one year of proof of purchase.