Related Products

Application

1. Remove any loose materials and thoroughly clean and dry surfaces.
2. Stir contents prior to use.
3. Apply a thin uniform coating using a roller or soft bristle brush. DO NOT ALLOW PUDDLES TO DEVELOP.
4. Allow primer to dry tack free (approx. 30 minutes). A second thin coat is recommended for superior performance.
5. Allow surface to dry for 8 hours prior to the installation of floor or wall coverings.

Coverage
300-500 sq. ft (27 - 46 m2) per 1 US Gal (3.78 L) depending on surface porosity.

Clean Up
Wash with water and soap.

CAUTION
Avoid direct contact with exposed skin. If contact occurs, wash promptly with soap and water. If product comes in contact with eyes, rinse immediately and repeatedly with water and if swallowed drink two glasses of water and get prompt medical attention.

KEEP OUT OF REACH OF CHILDREN
KEEP FROM FREEZING