SURFACE PREPARATION: Cut out all cracked, chipped and deteriorated concrete, until a sound surface is obtained. Clean area free of dust, dirt and oily contamination. Rinse surface area with clean water, leaving a damp, puddle-free surface.

MIXING: To each 25 lb. (11.3 kg) bag add approximately 1¼ to 1½ quarts (1¼ to 1½ litres) clean water. Stir and mix slowly to putty-like consistency. Let stand for 5 minutes, then remix. Do not overwater as this will reduce the adhesion and strength properties.

APPLICATION: Using a trowel, place the Stone Mason Vinyl Cement onto the dampened surface, applying pressure to ensure a complete bond. Level and then smooth. Build up in seperate layers, in ¼" to ½" (0.6 to 1.3 cm) increments to reduce shrinkage and cracking.

TEMPERATURE: Apply in temperatures above 5°C (40°F)

WISE TIPS

• Always read instructions before use
• Roughen smooth surfaces for better adhesion
• Can be opened to light traffic in 24 hours and heavy traffic in 72 hours.
• In hot, windy weather and direct sunlight, the surface should be covered with wet burlap and plastic and kept moist for 24 hours.