USE Hickson Products Ltd.
USE Hickson Stamp
 

Related Products

Acryli-Bond

Wood Repair
Wood Repair
Concrete Crack Filler
Concrete Resurfacer
E-Z Flow Patching Cement
Wood Repair
Wood Repair
Foundation Insulation Coating
Glass Block Mortar
Instant Patching Cement
Instant Post Cement
Instant Waterstop
Mortar Fix
Wood Repair
Wood Repair
Premium Concrete Repair
Ready Mix Concrete Patch
Wood Repair
Wood Repair
Surface Bond Fibre Cement
Wood Repair
Water Proof Cement
Water Proof Cement
Water Proof Cement
Wood Repair

Vinyl Cement Patch

Black Knight

Wolman

 
  Technical Data
   
 
Hydrostatic Pressure Positive Pressure Negative Pressure
  752 hours at 140 m(461 ft) water head (1.4N/mm2 - 200PSI) exhibits no leakage and no softening. 664 hours at 140 m(461 ft) water head (1.4N/mm2 200PSI)limited dampness.
   
 
Physical or Performance Property Test Method Typical Value
Compressive Strength ASTM C 109 3 days = 44MPa(6400psi)
7 days = 51MPa(7400psi)
28 days = 60MPa(8700psi)
Tensile Strength ASTM C190 7 days = 6MPa(850psi)
Flexural Strength ASTM C293 7 days = 13MPa(1860psi)
28 days = 16MPa(2375psi)
Bond Strength to Concrete ASTM C882 8MPa(1200psi)
Water Absorption   ASTM C67 1.5%
Abrasion Resistance ASTM C 807 20 to 25 minutes at 700F (210C)
Accelerated Weathering ASTM G23
ASTM D822
2,000 Hours (Carbon Arc)
Salt Spray Resistance ASTM B117 300 Hours - Pass
Freeze-Thaw Resistance ASTM C666 Procedure B 200 Cycles - Pass
Fungus Resistance ASTM G21 five fungal cultures No Fungal Growth after
21 days
Water Vapour Transmission ASTM E96 Satisfactory move
ment of water vapours
at differential
pressure of 75 Pa.
Breathability ASTM E283 1.08L/min
Air Leakage NRC Can Type III Air Barrier
Chemical Resistance ASTM C267-77 “Chemical Resistance of Mortars” no detrimental effects on the
U-Seal when exposed to
dissolved methane gas, blood,
wine, milk, ammonia, raw
sewage, tap water.


 
Conductance results for “K” values Substrates Negative Pressure
  Concrete wet condition 25
dry condition 10
  Expanded Shale Block wet condition 11
dry condition 4
  Pumice Block wet condition 5.5
dry condition 2
   
  Approvals:
Pass BS6920-1996 “Suitability for Non-metallic Products for Use in Contact with Water Intended for Human Consumption” and approved by the Bermuda Department of Health for use in coating water catchment for human consumption. Approved for Coating Walls & Floors in Registered Establishments Food Production, Agriculture Canada. Has been shown to act as a barrier to the infiltration of radon gas. Approved for waterproofing of vacuum buildings at Candu Nuclear Power Stations.



Jump To:
Copyright © 2002, 2003 U.S.E. Hickson Products Limited