| Stone Mason Super
Proseal is a dry polymer modified, cement-based, extremely
smooth coating designed specifically for use in potable water
catchment and containment systems. It can be used on concrete,
masonry, stone, stucco surfaces to dampproof and decorate
in one operation. It fills minor surface textures and masks
colour variations but will not hide mortar joints. Super Proseal
forms a smooth, durable finish which does not hold dirt and
is easily cleaned with warm water and detergent. It has a
breathable finish preventing penetration of wind driven rain
yet allows moisture vapour to escape without disrupting or
blistering the finish. Super Proseal does not soften when
submerged in water nor with repeated wet/dry cycles. Being
a cement-based material a coating of Super Proseal provides
an additional alkaline barrier to carbonation and the resulting
corrosion of the reinforcing steel. Super Proseal is mildew
resistant, does not support fungus nor bacterial growth. It
is non-combustible and will not contribute to flame spread
or generate smoke. The smooth surface is extremely resistant
to abrasion and has excellent durability.
|
| Use on any properly prepared
concrete, stone, or stucco surface, may be used in contact
with water for human consumption, use for a smooth finish
on cistern and tank linings in potable water systems, use
for a smooth, easily applied and maintained surface for swimming
pools use for a smooth finish on vertical, overhead and horizontal
non-traffic bearing surfaces as in pools or cistern floors,
sills, lintels, parking garages, etc. Also can be used to
back-coat precast or tilt-up panels to prevent moisture penetration
and dampness, and can be used as a base coat over U-Seal,
Stone Mason Plaster Mix, stucco, shot-crete, prior to the
application of Weatherguard, Textureguard, or Last-O-Guard,
use as a block filler by mixing with Weatherguard, use as
a smooth basecoat before the installation of Weatherguard,
Textureguard or Last-O-Guard. |
|
The consumer shall satisfy themselves of the suitability of this product for the intended purpose.
Weather, applicator's skill and surface conditions are beyond manufacturer's control.
We, therefore, limit our liability to replacement of defective material only,
within one year of proof of purchase.
|