|
|
|
|
PRODUCT
USES
Stone
Mason Instant Patching Cement is ideal for repairing steps,
driveways, sidewalks, curbs and patios. |
|
|
|
PRODUCT
DESCRIPTION
Stone Mason Instant Patching Cement is
an exceptionally strong, fast-setting mortar for use on concrete
and masonry. It is ideal for exterior and interior steps,
walls, driveways, sidewalks, curbs and patios.
|
YOU
NEED
·
Trowel
· Sponge
· Wire Brush
· Mixing Pail
· Stir Stick |
|
WARRANTY
The consumer shall satisfy themselves of the suitability of this product for
the intended purpose. Weather, applicator's skill and surface conditions are
beyond manufacturer's control. We, therefore, limit our liability to replacement
of defective material only, within one year of proof of purchase.
|
|
|
Application
Guide
|
|
Surface
Preparation: Remove all cracked, spalled and
deteriorated concrete to create a solid surface. Remove
loose concrete and rust using a wire brush. Wash the
area clean with water. Remove standing water and leave
surface damp before applying Instant Patching Cement.
Mixing:
Mix only what may be applied within ten minutes. Combine
Instant Patching Cement in a bucket with water to achieve
a putty like consistency. For a stronger bond, replace
water with Stone
Mason Acyli-Bond.
Temperature:
Apply in temperatures between -7°C (20°F) to
49°C (120°F). If Acryli Bond us used as mixing
liquid, do not apply if temp is below 5°C (40°F)
Application:
Fill Instant Patching Cement to allow sculpting after
product has initially set. After initial setting and
within ten minutes, shave excess Instant Patching Cement
to desired shape. Allow to harden. Open to foot traffic
in four hours.
|
|
|
