|
|
|
|
PRODUCT
USES
Use
E-Z Flow Underlayment and Super E-Z Flow Underlayment
to level surfaces in new construction, remodeling work
and corrective work. They can be used as a subflooring
finish for carpet, tiles, epoxy coatings, and other floor
surfacing systems. They can be applied over concrete,
wood, steel, ceramic tile and other sound, rigid flooring.
Both are compatible with common adhesives. For increased
compressive strength and even better workability use Super
E-Z Flow. |
|
|
|
PRODUCT
DESCRIPTION
E-Z Flow Underlayment and Super E-Z Flow
Underlayment are Self Leveling cement based products designed
for leveling floors without troweling. When mixed with water
they become a fluid material which will seek its own level
producing a smooth finish.
|
|
ADVANTAGES
·
Mixes with water only.
· Pumpable/pourable.
· Low in-place cost.
· Water resistant.
· Takes foot traffic after 6 to 8 hours.
· Eliminates trowelling.
· Quick installment.
· Not a gypsum product.
· Properties similar to concrete.
· No sanding or grinding when properly installed.
· Can be featheredged.
· Hard surface.
· Low shrinkage.
|
YOU
NEED
· Gloves
· Power Mixer
· Paint Tray & Roller
· Squeegee |
COVERAGE
A 50 lb.. (22.7 kg.) bag of E-Z Flow Underlayment
Self Leveling will cover approximately 1.8 m2 (20
sq.ft) at 6 mm (1/4") thick. E-Z Flow Underlayment Primer
#100 will cover approximately 200-300 square feet per gallon
(18.6-28 square metres per 3.8 litres). See Technical Datasheet
for more information. |
|
WARRANTY
The consumer shall satisfy themselves of the suitability of this product for
the intended purpose. Weather, applicator's skill and surface conditions are
beyond manufacturer's control. We, therefore, limit our liability to replacement
of defective material only, within one year of proof of purchase.
|
|
|
