NailTite™ NT-100 Super Seal Low Expanding Foam Sealant is recommended for heating/air conditioning, plumbing, refrigeration, electrical, drywall, and general construction. Seals out radon, drafts, gases, odours, water, dust, sound and pests.

NT-100 allows you to have controlled dispensing. Ideal for sealing around wall outlets, sill plates, foundation walls, behind baseboards, windows and doors. NT-100 is a low expanding foam which prevents bowing of windows and doors. NT-100 contains no CFC’s and in non-flammable.
NT-100 has an R Factor of 5 for each inch of foam in place... more than twice that of glass insulation. NT-100 adheres to most building substrates except teflon, silicone and polyethylene. The NT-100 container is designed for use by the professional with a NailTite™ Gun Applicator. Once the dispensing gun has been attached to the NT-100 can, the foam sealant is easily and efficiently dispensed...
exactly where you want it to go with no mess to clean up later. The flow can be metered by the easy-to-use regulator positioned on the back of the gun.

To keep dispensing guns in top condition, our Professional Foaming System also includes a Foam Gun Cleaner in an aerosol can which is attached to any of our dispensers. Professionals can clean out their foam guns on the job and have them ready to go for their next project.
The Foam Gun Cleaner is also easily used without a dispensing gun, simply by attaching the supplied nozzle and using the can as you would a normal aerosol spray can. The cleaner is a valuable tool to keep handy when dispensing foam because it will instantly dissolve uncured foam. It is recommended that a can of foam or cleaner by left attached to any dispensing gun that is not in use to
prevent material from curing in the gun.

NT-100 is packaged in 680 g (24 oz) aerosol cans – 12 cans per case. These cans are designed to be used with any of NailTite’s dispensing guns. For larger projects, NT-100 is available in 10 lb and 16 lb tanks with hose applicator. NT-100 is available in creamy white only.

The consumer shall satisfy themselves of the suitability of this product for the intended purpose. Weather, applicator's skill and surface conditions are beyond manufacturer's control. We, therefore, limit our liability to replacement of defective material only, within one year of proof of purchase.