|
|
|
|
PRODUCT
USES
Use
Black Knight Roof Repair (Dry Surface) to bond flashing
felts in place, tie-ins, vents, gutters and general roof
repairs. |
|
|
|
PRODUCT
DESCRIPTION
A high quality, asbestos-free cement formulated
with a unique combination of selected asphalts, fillers and
reinforcing fibres to provide a medium boied, smooth, trowelable
cement. It is available in regular grade or in winter grade
which has a lower viscosity and is lighter bodied than regular
grade.
|
ADVANTAGES
·
Asbestos Free: no health or environment problem
· Can be used in conjunction with Glassfab for long lasting
repairs
· Low Sag: can be applied on vertical surfaces
|
|
YOU NEED
·
Trowel
· Paint gloves
· Mineral spirits
|
PACKAGING
·
4 Kg cans
· 20 Kg pails
· 200 Kg drums |
COVERAGE
1 litre covers 1.25m2 (2 gallons
oer 100 sq.ft) |
|
WARRANTY
The consumer shall satisfy themselves of the suitability of this product for
the intended purpose. Weather, applicator's skill and surface conditions are
beyond manufacturer's control. We, therefore, limit our liability to replacement
of defective material only, within one year of proof of purchase.
|
|
|
Application
Guide
|
|
Remove
all dust, dirt, grease, and oil from all surfaces that
are to receive Black Knight Roof Repair (Dry Surface).
Prime
flashings with Black
Knight Roof Seal Primer at a rate of 1/3 litre/m2
(3/4 gallon/100 sq.ft.) and allow to dry. Trowel apply
a uniform coat of Black Knight Roof Repair (Dry Surface)
at a rate of 1.24 litre/m2 (2 gallons/100 sq.ft.) over
the area to be patched.
If
additional reinforcement is desired; embed Glassfab
Asphalt in the first coat of Black Knight Roof Repair
(Dry Surface) and then apply a second coat of cement
of the Glassfab. Extend the coating at least 15cm (6")
beyond the repair area. "Crown" or grade the
repair to ensure proper water run-off.
|
|
|
