SURFACE PREPARATION: Remove all loose dirt, dust, heavy accumulations of bitumen, and foreign material from the roof with brooms, water, air, vacuum, and any combination necessary for sufficient cleaning.

For application on metal roof surfaces, all rust or loose coating should be removed by wire brushing.

Inspect roof to locate and repair all defects.

Cover drains and vents to prevent clogging and interior damage.

APPLICATION: Stir Aluminum Roof Coating thoroughly before and occasionally during the application process, using a mechanical mixer for a minimum of 3 minutes.

Ensure that all surfaces are dry before commencing the application.

Brush or spray apply a uniform coating onto the roof surface.

LIMITATIONS: Do not apply in areas which pond water. Do not apply to surfaces that are dusty, dirty or moist. Do not apply to new asphalt roofs less than three months old, asphalt cutback coatings less than six months old, or to emulsion coatings less than 30 days old. Do not apply in rain or if rain is expected before coating is dry (minimum 4 hours).