SURFACE PREPARATION: Remove all loose dirt, dust, heavy accumulations of bitumen, and foreign material from the roof with brooms, water, air, vacuum or any combination necessary for sufficient cleaning. For application on a metal roof, all rust or loose coating should be removed by wire brushing. Inspect roof to locate and repair all defects. Allow repaired areas to cure and surfaces to become dry.

APPLICATION: Prepare roof or other surfaces as outlined above. Stir throughly before and occasionally during the application process, using a mechanical mixer, for a minimum of 3 minutes. Brush or spray Aluminum Roof Paint onto the roof surface. Apply only to dry surfaces.

LIMITATIONS: Do not apply to areas which pond water. Do not apply to dirty, dusty, or damp surfaces. Do not apply to new asphalt roofs less than 3 months old. Do not apply to asphalt cutback roof coatings less than 6 months old. Do not apply to emulsion coatings that are less than 30 days old. Do not apply in rain or if rain or heavy dew are expected before coating is dry (minimum 4 hours).

CLEAN-UP: Clean up with mineral spirits.