|
|
PRODUCT
USES
Use to coat primed metal surfaces, masonry, built-up roofs and many other surfaces that require or would benefit from a reflective surface. Use over well cured paints or primers on metal surfaces. Use as a maintenance coating on rust blemished wire mesh fences etc.. |
|
|
|
PRODUCT
DESCRIPTION
A high quality reflective coating in a paint form, containing a very high volume of leafing grade aluminum flakes in an asphalt base. It dries to a bright, durable reflective finish.
Meets ASTM D2824 Type 1 Specification.
|
|
ADVANTAGES
·
Highly reflective.
· Reduces thermal load saving energy cost.
· Increases resistance to U.V. deterioration.
· Reduces bleed-through of the covered membrane.
· One component.
· Lowers labour cost and easily applied.
· Versatile.
· Compatible with both asphalt membranes as well as prepared metal surfaces.
· Recoatable.
· Reducing maintenance costs.
|
YOU
NEED
· Stir Stick
· Paint Gloves
· Roofing Brush or Spray Gun
· Mineral Spirits |
COVERAGE
On metal surfaces - 1 litre per 5 square metres (1/2 gallon per 100 square feet).
On composition roofs - 1 litre per 2.5 square metres (1 gallon per 100 square feet). |
SIZES AVAILABLE
3.78 l , 18.9 l. |
|
WARRANTY
The consumer shall satisfy themselves of the suitability of this product for
the intended purpose. Weather, applicator's skill and surface conditions are
beyond manufacturer's control. We, therefore, limit our liability to replacement
of defective material only, within one year of proof of purchase.
|
|
|
