Application
REMOVE all dirt and loose material with a stiff brush or water. Clean oil spots and stains with Black Knight Asphalt and Concrete Cleaner. STIR Black Knight Driveway Resurfacer thoroughly before each application. LIGHTLY dampen surface; do not leave any standing water. FILL all larger and deeper cracks with Black Knight Crackfiller and allow to dry. DEPRESSIONS should also be filled with Black Knight Depression Filler. Black Knight Driveway Resurfacer should then be applied in a layer of up to 1/4” (0.6 cm) thickness; apply firmly with a trowel or putty knife and allow to dry for approximately 24 to 48 hours, or until hard.

Drying Time
Dries in approximately 24 hours. Do not apply when rain is forecasted within 24 hours.

Coverage
One U.S. Gal./3.78 Litres covers approximately 6 sq. ft. (0.6 sq. m.) at 1/4”(0.6 cm) thickness.

Clean Up
Clean up equipment and spills before Black Knight Asphalt Driveway Resurfacer dries with water and/or soap. If product dries, use Stone Mason Degreaser to clean up.

Limitations
Do not apply if temperature is below 50 F ( 10 C ). Not recommended for steeply inclined driveways as surface may become slippery when wet.

KEEP FROM FREEZING
KEEP OUT OF REACH OF CHILDREN.

CAUTION
Avoid eye and skin contact, wear protective eyewear and gloves.